9mm Multi Mode Action Back Cap

Multi-Mode Action Back Cap- Dry Fire and Boresight Function - 2 in 1

The 9mm Multi Mode Back Cap serves not only as a standard dry fire back cap, but also turns your laser into a digital boresight! 

Built in device protects your firing pin (like a snap cap) thus eliminating the need for additional equipment. 

This back cap is used to enhance dry fire practice with point of impact recognition / feedback, as well as  controlled bore sight activated by trigger pull. 

This back cap offers you two functions in one cap. 

All caps are guaranteed for least between 5,000 shots minimum or a year.  

The Dual Function back cap can be used to replace any cap on all SureStrike™ 9mm cartridges and can be used with all available caliber adapters. 

(Excludes .38SP/357, .380, 223, Makarov and Vibration Cartridges)

The transition between the two functions is done simply by holding down the primer part of the cap (with a pencil or any other similar object, even your finger) for 7-10 seconds. A double flash will indicate the transition between modes.

This item includes:

• 9mm Multi Mode replacement Action Back Cap 
• battery
• user guide

All replacement back caps have a microprocessor controlled primer activating the SureStrike™ laser cartridge. By using exchangeable back caps, you can decide which functionality is most suitable for your training. This feature makes SureStrike™ the most versatile dry fire training system available today. 

Instructions: The cap comes standard in dry-fire mode. To transfer the cap to the boresight function, assemble the laser cartridge and press down on the primer for 7-10 seconds. The laser will flash once and then twice. Once you see the double flash, release the primer. The back cap is not set for boresight mode. The next time you press the cap, the laser will be a constant on. To switch back to dry fire mode, hold down the primer in the cap for another 7-10 seconds and wait for the first flash. Then release. Your cartridge is not set for dry fire mode.